| General |
| Maximum Analog Waveforms |
20 (4 isolated, 16 non-isolated) |
| Event Inputs |
8 (TTL) |
| A/D Resolution |
16 bit (separate A/D per channel) |
| A/D Sample Rate |
500 kHz per channel |
| Frequency Response (Bandwidth) |
100 kHz per channel |
Anti-Aliasing Filter
|
4 pole Bessel |
| Pre-capture filters |
Low pass, high pass, band pass, band stop, RMS |
| Post-capture filters |
Low pass, high pass, band pass, band stop |
| User Engineering Units |
Yes |
| Calibration |
Semi-automated to external reference |
| Frequency Counter |
Yes, on Channels 1 & 5 |
| Frequency Accuracy |
±0.005% of measurement |
| Isolated Voltage Input Channels (Channels 1-4) |
Input Type
|
Isolated, AC/DC coupled |
| Isolated Input Connector |
Guarded banana jacks (red/black) |
| Max Rated Input |
250 Vrms or DC, Cat II |
| Max Transient Input |
±800 V (not to exceed 250 Vrms) |
| Isolation |
250 Vrms or DC, Cat II (channel to chassis, channel to channel) |
| Specified Ranges |
100 mVFS to 800 VFS |
| Attenuator Ranges |
1, 10, 50, 200 and 400 Volt |
| Accuracy |
± 0.07% of attenuator |
| Intrinsic Noise (pk-pk) |
<0.2% of attenuator |
| Input Impedance |
1 MΩ |
| Non-Isolated Voltage Input Channels (Channels 5-20) |
| Input Type |
Differential, non-isolated DC coupled
|
| Differential Input Connector |
25-pin D-sub male connectors
(2 per unit, 8 channels per connector) |
| Maximum Rated/Transient Input |
+/-50 VDC (35 Vrms) |
| Specified Ranges |
80 mVFS to 100 VFS |
| Attenuator Ranges |
80, 200, 400 and 800 mV; 2, 4, 5, 10, 25 and 50 V |
| Accuracy |
± 0.05% of attenuator (800 mV; 2, 4, 5, 10, 25 and 50V attenuators)
± 0.25% of attenuator (80, 200 and 400 mV attenuators) |
| Intrinsic Noise (pk-pk) |
< 6.25 mV (80, 200, 400 and 800 mV attenuators)
< 0.33% of attenuator (2, 4, 5, 10, 25 and 50 V attenuators) |
| Input Impedance |
250 kΩ |
| Data Acquisition Recording |
Operational Modes
|
Scope, Review, Real-time (strip-chart) |
| Recording Method |
Internal 250 Gbyte disk drive,
optionally removable (HS version) |
| Maximum Sample Rate |
500,000 samples/second per channel |
| Minimum Sample Rate |
100 samples/second per channel |
| Total Capacity |
Over 100 billion samples |
| Data Stored |
Raw (unfiltered) data saved to the drive |
| Time Stamp |
Time and date automatically saved with data |
| Trigger Point |
Amount of pre and post trigger is user adjustable |
| Auto Re-Arm |
Automatic stacking of captures |
| Interface |
Ethernet
|
10/100/1000BaseT |
| DVD |
Supports archive of data to
CD-R, CD-RW, DVD-R, DVD+R & DVD+RW |
| VGA |
For displaying data on an external monitor |
| USB 2.0 |
For file upload using AstroVIEW X |
| Link Ports |
For synchronizing data captures on up to eight systems |
| Color Display |
| Type |
Active matrix color LCD (TFT) |
| Viewing Area |
15.0 inch / 38.1 cm (diagonal) |
| Resolution |
1024 x 768 |
| Touch |
Full-screen, resistive |
| Power |
| Input Voltage Range |
102 to 264 VAC |
| Frequency Range |
47 Hz to 63 Hz |
| Power Factor |
0.99 |
| Power Consumption |
150W maximum |
| Physical |
| Enclosure |
Aluminum, with armored end caps |
| Dimensions |
12.125” (30.8 cm) H x 16.0” (40.64 cm) W x 6.628” (16.84 cm) D (without handle) |
| Weight |
22.5 lbs |
| Environmental |
| Operating Temp |
40 to 105 ºF (5 to 40 ºC) |
| Operating Humidity |
10% to 90% non condensing |
| Compliance |
| Safety |
EN 61010-1, 2nd Edition (2001),
UL 61010-1:2004, 2nd Edition
CAN/CSA C22.2 No. 61010-1:2004 2nd Edition |
| EMC |
FCC Part 15, Subpart B, Class A; EN 61326-1 Class A |
| Power Harmonics |
IEC1000-3-2 |
