New Features: None.

Corrections:
• Improves support for text buffer changes made during real time mode.

Notes: None.

New Features: None.

Corrections:
• Fixes a rare date rollover problem with October 31.

Notes: None.

New Features:
• Adds support for 1, 1/10th and 1/60th Hz sample rates for slower signal applications.

Corrections: None.

Notes: None.

New Features: None.

Corrections:
• Improved linked capture feature for data capture. Improved trigger reporting for restored partial captures.

Notes: None.

New Features:
• Added WAVEAND to OR combination when active on HELP sheet.

Corrections:
• Improved trigger off for analog channels.

Notes: None.

New Features:
• Changed grid spacing on the "X-Y Plot" from 18 divisions to 20 divisions.

Corrections: None.

Notes: None.

New Features:
• Prevented change of analog settings while capturing (disabled channels in submenus). Made "Continuous Capture with Playback" and "Stacked Capture with Playback" always play back 100%.

Corrections:
• Improved continuous capture with playback.  

Notes:  None.

New Features:
• Add system log user text area to XYY playback header.

Corrections:
• Enhanced floppy drive access. Improved floppy disk formatting. Modified chart naming feature.

Notes:  None.

New Features:
• Added two new capture control choices.  Added AUTO-CHART maker function under MODIFY CHART for easy chart creation. Extended DEFAULT CHART to handle copying one chart layout to another.  Added clock trigger.  Added another path to RECORD STATUS under SYSTEM I/O menu.  New version of floppy disk software

Corrections: None.

Notes: None.

New Features: None.

Corrections: None.

Notes:
• Special release to fix a manufacturing / calibration issue.

New Features:
• Auto ID added to playback mode.  Added total number of channels captured under <SYS>,SETUP CAPTURE, MORE.

Corrections:
• Improved event playback with data capture.    
• Modified host control MEAS command.
• Improved header information reporting for data playback.

Notes: None.

New Features:  None.

Corrections:
• The current mode returns to real-time or data logger after an auto playback or auto archive.

Notes:
• Three additional software versions are available that provide helpsheets in French, German, and Italian.

New Features:
• The record review host command (RREV) has been added which allows a host computer to upload a compressed record for quick review.  The playback trigger mark enable/disable option has been added to allow the user to turn on/off the full page trigger mark during a playback. The menu option is in the SETUP PLAYBACK menu.  A host command (PMRK)  was also added for host control. "Single Capture with Auto Archive" and "Single Capture with Auto Archive and Auto Playback" have been added to the choices listed under the CAPTURE CONTROL menu.  A keypad input feature has been added to the LAYOUT GRIDS menu, DLOGGER CHANS menu, and the window in the DATA ANALYSIS SETUP menu.

Corrections: None.

Notes: None.

New Features:
• Data captures can now be saved to and restored from a floppy disk.  This new menu is available under the <SYS>, SETUP CAPTURE, MORE, RECORD STATUS menu.  The Dash 10 will allow archives to be stored up to the available space of the floppy disk.  Captures are stored in the binary format. Data captures can now be uploaded to and downloaded from a host computer via RS232 or GPIB, using the host commands in the host protocol. An "Identify All Channels" feature has been added.  To utilize this feature, press the "0" key on the numeric keypad, then the <ID> key.

Corrections: None.

Notes: None.

New Features:
• Host Control protocol implemented for RS232 and GPIB.  Playback window units can be chosen in time, samples, or percentage.  XY, XYY, and FFT plots are now supported for data captures.

Corrections: None.

Notes: None.

New Features:
• Adds CHANNEL MASTER to analog setups.  Adds signal conditioner reporting, where top and bottom grid values are printed at the end of the text buffers for each channel.  Status sheets have been added under the <HELP> key.  Grid labeling has been added, which allows the user to print the top and bottom grid values, as well as the current value of any signal.  (This is initiated by entering the number of the channel on the numeric keypad,  then pressing the <ID> key.)  Multi-board data capture capability has been added, each 10-channel input board can be configured differently for sample rate, trigger position, size, channels, etc. ( Each board will create a seperate record.  Records are labeled automatically as REC-BRD.  In order to capture data from multiple boards to ONE record, the LINK field must be turned on.  In order to do this, all boards must have the same capture parameters such as sample rate, triger position, etc.  A linked record can play data from multiple boards on the same chart.)

Corrections: None.

Notes: None.

First general release version available.