New Features:  None.

Corrections:
• Improves the conversion of files to ASCII formats when conversion is done without previously opening the file for review.

Notes:  None.

New Features:
• Changed the review structure to reflect longer channel names.

Corrections:
• Increased the maximum number of records that can be uploaded from the MT95K2 via SCSI from 96 to 255.

Notes:  None.

New Features:
• Supports dual sample rates for Dash 18 file review.
• Supports Dash 18 files using IRIG time code.
• For conversion to DADiSP file format, sample rate is added to the header information.

Corrections:
• Improved conversion of data to MS Excel format when converting using header information.
• Properly handles zero offset for Dash 18 files.
• Correlates data resolution for screen review and data conversion to various formats.

Notes:  None.

New Features:
• Support for Dash 18 data capture files.

Corrections:
• Support for Dash 18 data capture files.

Notes:
• Support for the Dash 18 data capture files include captured waveform data and event data. Scope capture, audio and video are not supported by AstroVIEW C. Dash 18 Offline is a program for your PC that supports the waveform, event, scope, audio and video. If you would like to purchase Dash 18 Offline (OL-18), please contact Astro-Med Customer Service.

New Features:
• Ability to disable the header information when converting files to Excel, ASCII, or other formats.
• Supports the modified data capture file format for the Everest.

Corrections:
• DADiSP file extension corrected to .dat.

Notes:
• Improved on-line help.

New Features:
• Supports Everest data capture files.

Corrections:
• Dash 16u - Improves signal display for files using external sample rate.
• All Products - Corrects path for conversion of multiple files.

Notes:  None.

New Features:
• A "Go to Marks" button added allowing quick access to data points of interest.
• An "Average Value" option added to the channel information window.
• Advanced data search capability added to search on absolute time.
• Support for European convention of using the comma to separate whole and fractional parts of numeric values.

Corrections:
• Improved signal tracing for baseline values.
• Channel limit values are now properly fixed at upper and lower boundary values for ASCII conversion.
• FFT computations improved to handle the variety of methods available.
• Improved scaling factor for Dash 10 user scaling units.
• File conversion without reviewing the waveforms now correctly saves to desired format.
• Absolute time format for MT95K2 files is correct.
• Greater than 30 channels for the MT95K2 is now properly supported.

Notes:  None.

New Features:
• A new option for saving data in ASCII format. User can select over and under range values to be represented by "++++" and "----" respectfully, or select the values to be the range maximum and minimum values.
• Ability to read and upload Dash 16u files over Ethernet.
• Print screen to paper has been improved to better utilize a standard 8.5 x 11 inch page.

Corrections:
• FFT analysis no longer causes an error if N size is selected.
The Dash II file header now includes the date along with the time when marking the trigger point.
• The sample rate is now handled properly for MT95K2 captures.

Notes:
• The note icon is now a graphic note instead of an "N".

New Features:
• A numerical data viewer is added.
• Supports GPIB data upload for the Dash 10.
• Supports the TM1 IRIG module for the AstroDAQ.

Corrections:
• Corrects an error with FFT analysis.

Notes:  None.

New Features:
• Supports Dash 8u RTD, Frequency to Voltage , and Very High Voltage modules.
• Supports K2 and Dash II file formats.
• Waveform analysis (RMS, Invert, Low Pass, Absolute Value) is added.
• Can now save screen to .BMP file.

Corrections:
• Properly prints to HP Laserjet printer while running under Win NT 4.0.
• The last IP address selected is retained in memory.

Notes:
• With this version, AstroVIEW 32 is replaced by AstroVIEW C. Customers should use AstroVIEW C.

New Features:
• Supports math option for the Dash 8n / Dash 8u.
• Supports Dash 8u programmable channels and most plug-in modules.

Corrections:  None.

Notes:
• Dash 8n / Dash 8u version 11.3 and higher require AstroVIEW C version 1.1 or higher.
• AstroVIEW C is now separated from AstroLINK C.

First general release version available.