Dash 8HF-HS Specifications

Color Display
Type Active matrix color LCD (TFT)
Viewing Area 15.0 inch (diagonal)
Resolution 1024 x 768
Touch Full screen, resistive
Interface
Ethernet 10/100/1000BaseT
VGA For displaying data on an external monitor
USB 2.0 For external peripherals and file export
Link Ports For synchronizing data captures on up to eight systems
A/D Modules
Maximum Waveforms 8
Event Inputs 8
User Engineering Units yes
Calibration Semi-automated to external reference
Pre and Post-capture Filter Advanced lowpass, highpass, band pass and bandstop filtering
Isolated Input Module
Connector Guarded banana jack
Bandwidth 200 kHz  4 pole Bessel
Max Rated Input +/- 250 Vrms
Max Transient Input +/- 800 V
Isolation 250Vrms, channel to channel, channel to chassis
Specified Ranges 100 mVFS to 800 VFS
(0V offset for 800 VFS range)
Attenuator Ranges 1, 10, 50, 200 and 400 Volt
Accuracy (25°C) +/- 0.07% of attenuator
Intrinsic Noise (pk-pk) <0.2% of attenuator + 0.05% of span
Min Input Impedance 1 Megohm
Frequency Counter Yes, on channels 1 & 5
Frequency Accuracy +/- 0.005% of measurement
Recording
Operational Modes Scope, Review, Realtime (strip-chart)
Recording Method Internal ATA disk drive, optionally removable
Maximum Sample Rate 2,000,000 samples/second per channel
Minimum Sample Rate 100 samples/second per channel
Total Capacity Over 100 billion samples
Maximum Record Up to the drive capacity (250 GB)
Data Stored Raw (unfiltered) data saved to the drive
Time Stamp Time and Date automatically saved with data
Header Information on units, range, sample rates, etc saved with data
Data Filtering Post capture filtering changes can be made
Events Stored with data
Trigger Point Amount of pre and post trigger is user adjustable
Auto Re-Arm Automatic stacking of captures
Power
Input Voltage Range 100 to 250 VAC
Frequency Range 47 Hz to 63 Hz
Power Factor 0.99
Physical
Enclosure Aluminum, with armored endcaps
Dimensions 12.125” H x 16.0” W x 6.628” D (not including handle)
Weight 24.5 lbs
Environmental
Operating Temp 5 to 40°C (40 to 105°F)
Operating Humidity 10% to 90% non condensing
Compliance
Safety EN 61010-1:2001, UL 61010A-1, CSA C22.2 No. 1010.1-92
EMC FCC Part 15, Subpart B, Class A, EN 61326
Power Harmonics IEC1000-3-2