Investor | Technical Support | Contact Us | 877-867-9783
600 East Greenwich Ave. West Warwick, RI 02893
600 East Greenwich Ave. West Warwick, RI 02893
Dash 18X Specifications
| Color Display | |
| Type | Active matrix color LCD (TFT) with 17" viewing area |
| Resolution | 1280 x 1024 |
| Touch | Full-screen, resistive |
| Functions | User interface with touch-based icons and menus; Real-time waveform monitoring; Review previous waveform records while recording; Overlay numeric values in Engineering Units |
| Interface | |
| Ethernet | 10/100BaseT |
| DVD | Supports archive of data to CD-R, CD-RW, DVD-R, DVD+R & DVD+RW |
| VGA | For displaying data on an external monitor |
| USB 1.1 | For external peripherals and file export |
| Analog Input Boards | |
| Maximum Boards | 3 |
| Maximum Waveforms | 18 |
| A/D | 14 bit |
| Standard Event Inputs | |
| Number of Inputs | 8 |
| Connector | D-shell (9-pin) |
| Input Type | TTL with pull-up (0 to 5VDC) |
| Response | Detects if duration is greater than 0.01 msec |
| Real-time Signal Processing | |
| Filters | Low Pass Stops: 10 Hz to 10,000 Hz; High Pass Starts: 0.1 Hz to 100 Hz; Notch: 50 or 60 Hz center |
| RMS | Time constant selectable from 0.02 to 2 seconds |
| Frequency to Voltage | 5 Hz to 20 kHz, +/- 0.05% of measurement + 0.1 Hz |
| Cross-Channel | Sum, Difference, Ratio, Product (Power) |
| Real-time Signal Testing | |
| Basic | All active signals monitored simultaneously |
| Test Types | Tests include window, slope/level, slew and event pattern |
| Outputs | Result available for alarms, trigger, abort and external TTL |
| Data Capture | |
| Recording Method | Internal 73 Gbyte hard drive |
| Max. Rate | 100,000 samples/second per channel (all channels) |
| Min. Rate | 1 sample/minute |
| Dual Rate | Second slower rate available when no trigger is used |
| Total Capacity | 16 billion samples |
| Max. Record | 2 billion samples |
| Header | Information on units, range, sample rates, etc. saved with data |
| Events | All standard event inputs captured with waveforms |
| Trigger Point Lock | Amounts of pre- and post-trigger is user adjustable |
| Auto Re-arm | Allows automatic stacking of captures |
| Auto Playback | Yes |
| External Sample Rate | TTL sample clock up to 40,000 Hz |
| Signal Conditioner Specifications (General) | |
| Channels per Module | 6 |
| Isolation | 250 Vrms (iso-common to chassis and other iso-commons) |
| Bandwidth | 12 kHz (-3dB) |
| Input Coupling | DC |
| Zero Suppression | Yes |
| User Engineering Units | Yes |
| Calibration | Semi-automated to external reference |
| Single Ended Voltage Input | |
| Input Type | Isolated, single-ended |
| Connector | Guarded banana jack |
| Max. rated input | +/- 250 Vrms |
| Max. transient input | +/- 400 V |
| Specified ranges | 40 to 400 VFS; 4 to 40 VFS; 0.4 to 4VFS |
| Accuracy (25°C) | +/- 0.5% of attenuator |
| Min. Input Impedance | 1 Megohm |
| Differential Voltage Measurements (use for bridge measurements) | |
| Input Type | Isolated, differential |
| Connector | Screw terminal header |
| Absolute Max. Input | +/- 40 V differential |
| Measuring Ranges | 200 to 1600 mVFS; 50 to 500 mVFS; 5 to 50 mVFS |
| Accuracy (25°C) | +/- 0.5% of attenuator |
| Min. Input Impedance | 200 kOhm |
| CMR at 60 Hz | > 80dB |
| Auto Balance | Yes, limited to maximum span |
| Thermocouple Measurements | |
| Input Type | Isolated, differential with screw terminal header connector |
| Absolute Max. Input | +/- 40 V |
| Specified Range | Type J: 0 to 760 °C Type K: 0 to 1370 °C Type T: -160 to 400 °C Type E: -100 to 870 °C Type N: 0 to 1300 °C |
| Accuracy (25°C) | 0.5% of measurement + 2 °C |
| Bandwidth | 10 Hz (-3dB) |
| Intrinsic Noise | 0.5 °C (1 Hz filter) |
| Linearization | NIST polynomial |
| Units | °C or °F |
| Excitation | |
| Connector | Screw terminal header |
| Excitation | Isolated 10V @ 20 mA |
| Adjustable | 0.1 to 10 V |
| Frequency Measurements | |
| Method | Zero-crossing, channels 1, 7 and 13 only |
| Signal Amplitude | Peak-to-peak minimum is 20% of attenuator |
| Hysteresis | Yes |
| Removable Drive | |
| Type | DVD+R |
| Format | MSDOS® format |
| Function | Setup files, software upgrades, data transfer/archive |
| Power | |
| Input voltage range | 100 to 250 VAC |
| Frequency Range | 47 Hz to 63 Hz |
| Power Consumption | 300 W maximum |
| Compliance | |
| Safety | EN 61010-1 |
| EMC | FCC Class A, EN 61326 |
| Power Harmonics | IEC1000-3-2 |
| Physical | |
| Enclosure | Aluminum |
| Dimensions | 16.1" L x 15.1" W x 6.4" H |
| Weight | 29 lbs. |
| Environmental | |
| Operating Temperature | 5 to 40 °C (40 to 105°F) |
| Non-operating Temperature | -20 to 60 °C (-4 to 140 °F) |
| Operating humidity | 10% to 90%, non condensing |
| Optional Chart Recorder - Model SCR-18 | |
| Chart Width | 11" |
| Max. Chart Speed | 50 mm/sec |
| Optional DC Input Power - Model PIM-18 | |
| Input Range | 9-18 VDC |
| Input Power | 200 W max |
| Fuse | User replaceable 25 A |
| Optional DC Input Power - Model PIM-18A | |
| Input Range | 20-32 VDC |
| Input Power | 240 W max |
| Fuse | User replaceable 10 A |
Demo and Trade-in Image Links
Knowledgebase
Visit our resource center to learn more about Astro-Med's products.
Stay Connected
Our Customers
Applications Industries
Power Applications
General Industrial Applications
Automotive
Aerospace
