Accessories

current probes

• 
  MR411

  The MR411 is a general purpose 400AAC or 600ADC current probe designed for use with Astro-Med recorders and data acquisition systems. The MR411 offers dual ranges of 40 and 400AAC or 60 and 600ADC.

• 
  SL261

  The Model SL261 is a portable 100A peak current probe that can accurately measure AC or DC current waveforms. The unit has proportional mV output for direct readings to Astro-Med recorders and data acquisition systems.

• 
  MR521

  The MR521 is a general purpose 1500AAC or DC current probe designed for use with Astro-Med recorders and data acquisition systems.

• 
  MN255

  The MN255 is a high sensitivity probe with voltage outputs (100mV/A and 10mV/A) and combine two switch-selectable ranges of 20A and 200A, thus permitting accurate measurements at low and high levels.

• 
  SR759

  The SR759 probe is a range selectable probe that offers four switch selectable ranges: 1, 10, 100 or 1000A. This probe has a voltage output proportional to the current measured in the jaw of the probe.

• 
  JM875

  The JM875 is a high performance AC Current Probe provides an accurate voltage output proportional to the measured current (1mV/A, 10mV/A or 100mV/A).

• 
  FP300A

  The FP300A is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. Measurement range is 5 to 300A.

• 
  FP3000A

  The FP3000A is a low cost AC current measurement probe, composed of a flexible sensor and an electronic module with a 14" double insulated cable.

• 
  FP6000A

  The FP6000A is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used.